Southlake Heater Replacement
Heater and Furnace Replacement
Heater and Furnace Replacement in Southlake
Is your home feeling colder despite turning up the thermostat? Are your energy bills creeping higher than usual? These could be signs that your furnace is no longer working as efficiently as it should.
At AC & Heat Solutions, we know how important it is to keep your home in Texas comfortable year-round. This is doubly true when area temperatures shrink into the single digits. Consider a furnace replacement if your current heating system is struggling to keep up with our cooler season.
Our team in Southlake and Grapevine is here to help you find the perfect heating system to keep your home warm and your energy bills in check.
Why Replace Your Furnace?
Replacing your furnace is a big decision, but it can also bring significant benefits to your home. Here are a few reasons why it may be time to upgrade your heating system:
Improved Energy Efficiency
Older furnaces lose efficiency as they age, requiring more energy to heat your home. A new, energy-efficient furnace can reduce energy consumption and lower monthly bills.
Enhanced Home Comfort
A modern furnace delivers consistent heating, eliminating cold spots and maintaining a steady, comfortable temperature. This is a big reason to invest in a Southlake furnace replacement.
Fewer Repairs
If you’ve been calling for Southlake furnace repairs multiple times a year, it’s a sign that your system is nearing the end of its life. Investing in a new furnace can save you the headache—and cost—of frequent calls to a local HVAC company.
Increased Home Value
A new furnace is an attractive selling point if you plan to sell your home. Buyers are likelier to invest in a property with an updated, energy-efficient heating system. With recent weather extremes in Texas, this has become a big sticking point in Southlake.
At AC & Heat Solutions, we’ve been helping homeowners in Southlake and Grapevine make the switch to better heating systems for over 28 years.
Signs It’s Time to Replace Your Furnace
Not sure if it’s time to replace your furnace in Southlake? Here are some signs that indicate your heating system may be on its last leg:
- Frequent Breakdowns If you’re constantly dealing with repairs, your furnace in Southlake is likely reaching the end of its lifespan. In most cases, replacing an aging heating system is more cost-effective than continually sinking money into furnace repairs.
- Inconsistent Heating If certain rooms in your home are warmer or colder than others, your furnace may be struggling to distribute heat evenly. This can be due to parts wearing down inside the unit. This issue can sometimes be solved by Southlake heating system maintenance.
- Unusual Noises Bangs, rattles, or squeals from your furnace are never a good sign. If they’re persistent, it’s a strong indicator that your furnace is wearing out. Call 817-421-4190 so one of our HVAC experts near you can silence the commotion.
- Rising Energy Bills A sudden spike in your energy bills without a corresponding drop in temperature is often a sign of an inefficient furnace. Upgrading to a new, energy-efficient model (or a heat pump) in Southlake can help lower your bills.
- Old Age Most furnaces have a lifespan of about 15-20 years. If your furnace is approaching or surpassing this age range, it’s time to consider a replacement. Our seasonal promotions and financing options can help save money when investing in new equipment.
Types of Heating Systems in Southlake
When it’s time to replace your furnace, choosing the right heating system is essential. At AC & Heat Solutions, we offer a variety of options to suit the needs of homeowners in Southlake and Grapevine:
Gas Furnaces
One of the most common heating systems, gas furnaces, are efficient and provide consistent heat. They’re an excellent option for homes with established access to natural gas.
Electric Furnaces
Electric furnaces are ideal for homes without natural gas connections. While they can be more expensive, they are reliable and efficient when properly maintained.
Heat Pumps
Heat pumps are a more energy-efficient option that transfers heat from the outside air or ground into your home. They can also function as an air conditioner during warmer months, allowing you to get double duty from one system.
Ductless Mini-Splits
These systems are perfect for homes without ductwork or for adding supplemental heating to specific rooms. Ductless mini-splits offer energy-efficient, zoned heating and can also be used for cooling.
If you’re unsure which heating system is best for your home, our team will work with you to determine the most cost-effective and energy-efficient option.
Financing Your New Furnace
At AC & Heat Solutions, we understand that replacing a furnace is a significant investment. That’s why we offer flexible financing options to make the process more manageable for homeowners in Southlake and Grapevine.
Our financing plans allow you to spread the cost of your new furnace over several months, making it easier to upgrade your system without breaking the bank.
Whether you’re looking to replace an old furnace or upgrade to a more energy-efficient system, we’re here to help. Contact us to learn more about our financing options and how we can make your furnace replacement project stress-free.
Why Choose AC & Heat Solutions for Your Furnace Replacement?
When it comes to furnace replacement, you want a team that’s reliable, experienced, and dedicated to quality. Here’s why AC & Heat Solutions is the top choice for homeowners in Southlake:
- Over 28 Years of Experience We’ve been helping homeowners stay warm for over 28 years. Our extensive experience means we can handle any heating replacement in Southlake, no matter how complex.
- Certified Technicians Our highly trained technicians are certified to install and service all major furnace brands. We take pride in our team's craftsmanship and professionalism.
- Customer Satisfaction Guarantee We’re not satisfied until you are. If you’re not 100% happy with your new furnace, we’ll work with you to make it right.
- Flexible Scheduling We know your time is valuable, which is why we offer flexible scheduling options to accommodate your busy life.
- Customers Sing Our Praises Don’t just take our word for it—check out our customer reviews! We’re proud to have a long list of satisfied clients who trust us for all their heating needs.
The Furnace Replacement Process
Replacing your furnace with AC & Heat Solutions is a straightforward and hassle-free process. Here’s what you can expect when you schedule a furnace replacement with our team:
- Initial Consultation We’ll assess your current heating system and help you determine the best replacement options based on your home’s needs and budget.
- Product Selection We’ll guide you through the available heating systems, explaining the benefits of each option.
- Installation Our certified technicians will remove your old system and install the new one. They will also handle all the permitting for you.
- Post-Installation Support After your new furnace in Southlake is installed, we’ll walk you through the system’s operation and answer any questions you may have.
Schedule Your Southlake Furnace Replacement Today
Don’t wait until your furnace breaks down to get a new one. If your heating system is showing signs of age or inefficiency, contact AC & Heat Solutions today for a professional furnace replacement in Southlake and Grapevine.
With over 28 years of experience, flexible financing options, and a commitment to customer satisfaction, we’re the trusted choice for homeowners in Northeast Tarrant County. Call us today at 817-421-4190 to schedule your consultation!
Frequently Asked Questions
Do I Really Need Furnace Maintenance in Southlake?
We suggest having your heater or furnace examined on a regular basis. A lot of heating failures occur because this vital part of homeownership is ignored in favor of a ‘fingers-crossed’ approach. During your inspection, our HVAC expert will look for signs of damage. They will also clean any dust away and test electrical components. From improved efficiency to manufacturer warranty requirements, there’s few better ways to protect your heating system. You can reach out to us at 817-421-4190 to schedule your furnace tune-up in Southlake.
How Often Should I Replace my Furnace Filter?
A key part of maintaining your heating system’s performance and efficiency is regularly changing the air filter. If you have a standard 1-inch filter, changing it once-a-month is advised. For 4-inch filters, meanwhile, manufacturers recommend waiting six to nine months between replacement. If you have shedding pets in your household, check more frequently. The best way to tell if it’s time for a new one is to look at it. If it’s more gray than white, it’s likely time to swap it out.
With Brands of Furnaces and Heating Products does AC & Heat Solutions Work On?
Our heating experts work with all brands of HVAC equipment including Coleman, Carrier, Bryant, Payne, Trane, Lennox, Rheem,Ruud, Amana, Daikin, Fujitsu, Mitsubishi, Frigidaire, Gibson, Goodman, Maytag, Weil McLain, American Standard, General, and Dynamic.
What Do I Do if My Heat Goes Out?
- Is power getting to your furnace or heater? Is a fuse or circuit breaker tripped? Make sure your power switch is in the ON position.
- When was the last time you swapped out your filter? If it’s been a while, try installing a new filter first. This can solve a lot of heating problems.
- Verify your thermostat is set to “heat” and not “cool”. If you notice the display is dim, try swapping out the batteries on the back of the unit.
- Is there snow or other debris blocking your outdoor vent? If so, remove the obstruction. This will allow your system to work more effectively.
If you still don’t have heat, it’s time to contact Southlake’s favorite furnace repair experts at 817-421-4190.
How Can I Reduce My Heating Bills?
The most obvious way to reduce heating bills in Southlake is to install a new heating system. But it’s not the only way to take a bite out of gas and electric bills. You can also:
- Lower Your Thermostat: Turning your thermostat down 10 degrees can reduce energy use by roughly a third. If that’s too cold to stomach, each degree will save around three percent.
- Get Rid of Air Leaks: Heat often escapes through holes in your home or ductwork. In older homes, this accounts for between 25 and 40 percent of all heat lost. Sealing these leaks not only prevents drafts but also lowers your energy bills.
- Service Your Heating System: Yearly tune-ups on your heating system are a great way to lower your heating budget. During these service calls, our Southlake HVAC technicians will clean your boiler or furnace, allowing it to operate more smoothly and efficiently.
- Install Better Insulation: Insulation is one area where home builders often cut costs. You might be surprised by how cost-effective getting your home reinsulated is. We suggest calling a local Southlake insulation contractor for a better idea of the type of savings you can expect.
- Cover Your Windows: The Department of Energy estimates that 30% of all heat is lost through the windows. While old ones should be replaced, even newer ones can leak warmth. Adding floor-length curtains helps keep the warmth from your heating system inside.
- Check the Vents: Now’s the time to make sure the vents are unobstructed. Are they dusty? Take off the plates and clean them. This simple step will allow the heat in your home to flow more easily and evenly throughout your home.
How Much Does a New Furnace Cost in Southlake?
The cost of a furnace installation is dependent on several factors including the type of furnace being installed, how much extra work is involved, and how large of a furnace you’ve chosen. Your home may also have two units which may raise the cost of a furnace replacement in Southlake.
Your Customer Service Representative Referenced a "No-Heat Call". What Is That?
A no-heat call is an industry term referring to a customer with a complete lack of heating power. Their furnace, boiler, or heater is producing no heat whatsoever for one reason or another. Because these scenarios can be uncomfortable, especially in Southlake's cooler seasons, we prioritize these appointments on our schedules.
What Should I Do with My Heating System if I’m Going on a Long Trip?
It’s time for the vacation of a lifetime! Just you and the Outback for the next three weeks. No more annoying TX winter to deal with. During that time, the last thing you want to think about is your home’s heating system. Some people turn off their furnace or boiler before they leave, but this is the wrong approach. Allowing your home to get too cold could not only burst pipes but damage appliances, walls, and photos.
To both save on costs and protect your home, you’ll want to set your thermostat at around 55 degrees, a little warmer if you have pets. Just don’t forget to set your thermostat to ‘vacation’ or ‘hold’ before you dance your way out the door.
Why Is One Room Cold and the Other Warm?
Is one of your bathrooms freezing and the other too hot? Heat inconsistencies like this are often the result of airflow problems. Blocked vents, improper heating system design, and leaky ductwork are often to blame. While you can try to DIY a fix like this, it’s often better to leave the fixing to an Southlake HVAC specialist. Call 817-421-4190 today and let AC & Heat Solutions even things out.
What’s an AFUE Rating?
First, this is an acronym that stands for Annual Fuel Utilization Efficiency. This rating tells you how effectively a water heater, furnace, or boiler converts its fuel into heat. The higher the number, the more efficient a heating system is. This number is reached by dividing the unit’s annual energy output by its input. The government sets acceptable minimum AFUE standards for equipment subject to periodic review and change.
What’s an Efficiency Rating?
The AFUE is one example of an efficiency rating. Other common ones include the seasonal energy efficiency ratio (SEER), heating seasonal performance factor (HSPF), and energy efficiency ratio (EER). Regardless of what measurement is used, these ratings all have one job. They tell you how well a heating system heats a space and how much energy it uses.
Should I Opt for an Electric or Gas Heating System?
Which fuel source is best for your home depends on several factors. We’ll briefly compare the two fuel sources across a variety of characteristics:
- Air Quality: Electric heating systems provide better air quality than their gas counterparts.
- Safety: No flammables or gasses means less risk to your family.
- Speed: Gas heaters generally reach temperature quicker.
- Extreme Weather: If your power’s knocked out by winter weather, electric furnaces can’t function. Gas units can still provide warmth.
- Lifespan: Electric furnaces in Southlake last slightly longer than gas ones.
- Maintenance: Gas furnaces require more maintenance overall.
- Cost: Electric heaters are less expensive to install but cost more to operate.
Should I Turn Off Vents in Rooms I’m Not Heating?
A lot of homeowners think that closing off vents saves energy. But it doesn’t. In fact, this attempt at energy-saving can:
- Cause undesirable pressure changes in your ductwork
- Lessen overall heating system efficiency
- Worsen existing air leaks
- Aid mold growth due to misdirected warmth
- Result in heat exchanger damage
Instead of shutting vents, open doors between rooms. If the issue is a room being too hot—and you haven’t zoned your home—you can slightly close the vent.
How Do I Tell What Kind of Heating System I Have?
The easiest way to tell the difference is by looking at how the heat is delivered. You use a boiler if you have radiators and water pipes coming from your unit. If you have ducts or vents, your home in Southlake is heated by a furnace or a heat pump. To tell the difference between the latter two, count how many pieces of equipment you have. If there’s just one and it’s outside, it’s a heat pump. Two pieces, meanwhile, mean you rely on traditional forced air. If you still aren’t sure, ask our Southlake HVAC technician during your heating system tune-up.
Is It Bad to Run My Heating System at High Temperatures?
Even if you have the constitution of a lizard, it’s a bad idea to set your furnace too high. In fact, most modern furnaces can’t be set above 90 degrees. This safety measure protects the system by preventing long cycles and overheating. This protects vital components like the heat exchanger. Your heating system likely has a high-limit switch as an additional safety measure. If it detects the furnace's interior is too hot, it will shut the unit off. Most Southlake HVAC experts recommend setting your thermostat no higher than 78 degrees.
What’s Two-Stage Heating?
Single-stage heating systems, typically older or more economical, only have one level of heating output. While you can adjust the temperature on the thermostat, it doesn’t alter how hard the furnace works. To help boost efficiency, many modern furnaces are two-stage. This means they have a high and low output setting. The former is used on the coldest days to keep Jack Frost at bay. During more mild weather, the lower setting kicks in. These systems save energy and allow for more even heat distribution. Due to their flexibility, they’re also called modulating furnaces.
Why Does My Home Get Dry When My Heating System Runs?
Hotter air can hold more moisture than cold air. So, as it cycles through your home, heated air will pull water from the environment. The combustion process can also lower your home’s relative humidity. It should also be noted that winter is often characterized by dry air. Consider installing a whole house humidifier in Southlake to make things more comfortable. These systems can be directly integrated with your furnace or heater.
What Parts Are There in a Heating System?
Here’s a breakdown of the parts you’ll find in most heating systems in Furnace Replacement:
- Blower: This component pushes heated air from your furnace throughout the rest of the home. If this part breaks, you’ll notice the unit is on, but the vents aren’t active.
- Blower Motor: The blower motor powers the fan in the blower. Without it, the air wouldn’t reach more than a foot or two from the unit.
- Blower Chamber: That motor generates a lot of force and vibration. This box houses the two parts above and stabilizes them, stopping them from falling off course or rattling apart.
- Combustion Chamber: This area of the furnace holds the entire firing system. For safety reasons, it’s separate from the blower chamber.
- Heat Exchanger: This is one of the most important parts of a modern furnace. It’s how you get warm, safe air in your home. The gasses created by the ignition process are piped into the heat exchanger. The excess heat warms this part, transferring that energy to the air flowing outside the exchanger’s walls. Once drained of heat, the combustion gasses are sent out the flue pipe.
- Burner: Every furnace needs fire to kickstart the heating process. Oxygen meets gas or an electric spark at the burner, and the resulting flame kickstarts the whole heating process.
- Burner Cover: This small piece of metal covers the flame sensor, blower chamber, and ignitor. Its primary responsibility is keeping flames inside the furnace.
- Flame Sensor: This part is small but mighty. It detects when the burner catches fire. Typically, it does nothing but wait. If there’s an issue with the burner, however, the sensor will shut the unit off, preventing deadly carbon monoxide leaks.
- Ignition System: Older furnaces have pilot lights, which are always on and ready to start the system. Newer units—anything made after 2010—have an electronic ignitor. Unlike pilot lights, these systems can’t be blown out by a gust of wind, making them more fault-tolerant.
- Limit Switch: This sensor reads the temperature inside your furnace. If the unit gets too hot, it’ll shut it off. You can typically find the limit switch under the supply plenum. You may hear it referred to as a fan limit or furnace high limit switch.